|
|
|
MAJOR 1.0 ©
Copyright Geo-Pioneers Ltd.
|
Short Description:
Program for GPS Network adjustment, transformation, and user defined regulation.
Different types of
cadastral points have their own methods of
measurement, coordinate computation, and quality
assurance criteria.
This software is useful for surveyors
trying to obtain a license from surveying
authorities. It
defines the measuring method (which includes the
.NET Framework architecture and quality assurance
criteria for measurements), as well as the
computation method for each cadastral point
(including net adjustment, transformation, quality
assurance of results, and final report format).
This program executes the entire process automatically while keeping the user informed on the results of each step until the final report for submission to surveying authorities has been generated.
Main Features:
- Gross Error Detection method (using Statistical testing & Loop
misclosure)
- Library of licensed points
- Least Square Adjustment algorithm
- RTK reliability assurance method
- Transformation method
- Method for calculating Cadastral Boundary points
- Regulation and Quality Assurance
- Smart Formal Report builder
|
Major 1.0 Main Screen
Design Consideration:
- The
Major 1.0 has exceeded the design limits and
was redesigned several times as a result of
profound research; during the development
process, it was necessary to layer the
system architecture and partition it into
subsystems in order to control such a huge
project.
- Planning for change
- The project was developed using the VB environment; conscious of its
advantages and its limitations.
|
Top
of page
| COORDINATE TRANSFORMATION TOOL, ©
Copyright Geo-Pioneers Ltd. |
Short Description:
Program for common GPS transformations for geodetic purposes. It enables surveyors to fit their GPS
measurements from the WGS ’84 Datum to any Local Datum in the world.
Main Features:
Transformation Model
- This Software Application calculates the Spatial Transformation Parameters using the Least Square Adjustment Method in order to fit the GPS measurements to a specific datum.
- It supports different file formats for Input and Output.
- It offers a Transformations Model
for using RTK.
- The application automatically separates the control points from the input, calculates the unknown points coordinates and prints these in the reports.
|
Least Square Undulation Model
-
This software application calculates a Local Undulation Model N= H-h. H indicates an Ellipsoidal Height, h indicates an Orthometric Height.
-
The calculation is based on Least Square Adjustment Computations.
-
Undulation can be a linear, quadratic or polynomial expression.
-
The application automatically separates the control points from the input, calculates the Orthometric height of the unknown points, and prints the results in the reports.
(Ellipsoidal and Optometric heights)
Design
Consideration:
- The project was developed using the VB environment; it has both advantages and limitations.
- Planning for change, The GEO-GRID OCX component was developed especially for the CTT to handle Surveyors GEO Data, and such components can be used in future developments.
|
|
|
MAJOR 1.0
| |
|
|
PT-Manager 1.1
|
The Optimal Determination of vehicle schedules
|
|
